Der Beitrag Vulcanier-Ohren erschien zuerst auf Mann vom Mond.

[See image gallery at www.mannvommond.de]
I wanted to make a mask that was easy to apply and where I could move my face. So I decided to split the makeup into 8 parts: A wig, a bald head (because the forehead piece extends past my hairline), a forehead piece, two jaw pieces, a chin, and two removable antennae for easy transport.

[See image gallery at www.mannvommond.de]
Ich begann damit, meinen Lifecast mit Alcote zu bedecken. Das hilft, die einzelnen Teile des Abgusses für das Abformen zu erhalten. Ich begann die Maske mit Monster Makers‘ Monster Clay Medium zu modellieren. Die Basis für die Antennen war ein 3D-Druck, den ich noch hatte. Hier kann man einige Punkte sehen, an denen ich die Maske in die verschiedenen Teile schneiden wollte.

[See image gallery at www.mannvommond.de]
After covering all the necessary areas with Monster Clay, I added primary shapes - these are the shapes that form the shape of the skull.

[See image gallery at www.mannvommond.de]
Then I added more details in the form of secondary shapes. I used several reference photos from Discovery and even some from Strange New World's Hemmer because I wanted to a) give the mask my own fingerprint and b) add details that Discovery's creators didn't use (like veins and a more angular, bony look).

[See image gallery at www.mannvommond.de]
I had to be very careful when modeling the jawline and chin, knowing that I would have to make cuts for the individual pieces here to ensure that these pieces would fit back together later.

[See image gallery at www.mannvommond.de]
Then it was time for the first cut (and the first cut is always the deepest...). I took off the antennas so I could cast them separately in epoxy.

[See image gallery at www.mannvommond.de]
I decided against casting them in foam latex because I wanted them to be as strong and light as possible. So I decided to use epoxy resin. After casting, each antenna weighs less than 20 grams. If you want to see how I molded them, I made a video on my Instagram. Have a look!

Unfortunately, I didn't take a picture of me cutting the chin and jawline into pieces. Anyway, when I did, the entire lifecast had to be placed in a bucket of water. This loosened the alcote and the monster clay came off, ready for custom mold making. Here I am molding the piece of the forehead.

[See image gallery at www.mannvommond.de]
So this is what it looked like after molding. I made the jaw and chin as flat shapes, and the forehead is a basket shape. I also wanted to put gloves on, so you can see the hands. But I didn't have time for that in the end.

So, that's my equipment for the foam latex cooking process.I bought an oven because foam latex oozes ammonia, so you can't do it in an oven you use for food.I also bought a heavy-duty blender and Monster Makers' foam latex kit, which included everything I needed to cast the prosthetics (latex, foaming agent, gelling agent, mold release agent).

[See image gallery at www.mannvommond.de]
I can't stress this enough: Foam latex is a princess. The ambient temperature and humidity have a huge impact on the outcome of the mask. So I had to make several passes before I had my first decent puff.

[See image gallery at www.mannvommond.de]
I also had to figure out how to get the oven to maintain the right temperature, and I had to figure out how long to cook the latex.This was really tricky. So if you want to make your own masks, don't just rely on the instructions that come with your foam latex.

Dies war einer meiner ersten Versuche.Man kann sehen, dass der Schaumstoff den „Stöpsel“ für die Antennen nicht ausfüllt.Außerdem gibt es etwas, das man „Laking“ nennt, d. h. Stellen, an denen unerwünschter Luftdruck dünnere Stellen im Latex hinterlassen hat.

I used several techniques to paint it.My first recommendation is acrylic paints.I love that you can use them with an airbrush. I mixed a base shade that was identical to my alcohol activated makeup instead of the other way around.

[See image gallery at www.mannvommond.de]
For the base, I mixed acrylic ink in FlexiPaint clear.FlexiPaint is a paint for latex so it doesn't get brittle when the mask moves and the paint sticks.

To achieve a vibrant, skin-like look, I used different types of paint and techniques.First, I mixed acrylic paints with ProsAide skin glue. This gives an opaque and flexible color that is perfect for larger areas. Of this, I dabbed on a dark blue and a light blue layer with a sponge.Then, I mixed a very light blue and a rather dark blue and used a toothbrush to spray tiny dots on the masks to make them look like blood vessels.After that, I used acrylic ink to add the shading.

[See image gallery at www.mannvommond.de]
Then came the hardest part: applying the makeup. I started with the bald cap. Using ProsAide, I glued the prosthetics to my face, continued with the forehead, and glued in the antennae. Then the jawline was glued on. The chin was made to cover the front lines of the jawline, so this was the last part. I used ProsAide Cream to cover some of the thicker transitions. Then I used alcohol-activated ProAiir Solid and Eulenspiegel Aqua Makeup to fill in the pink areas of skin between the dentures. Some details like a blue eyeliner were added.

All in all, I was quite pleased with the mask. Was it worth all the hassle, money, and tantrums?I would say yes.I had a lot of fun learning all the techniques and creating the mask. Let's see what next year brings.

Der Beitrag Making of: Andorianer-Maske erschien zuerst auf Mann vom Mond.

I've been dreaming about trying foam latex for quite some time. I have already tested silicone, latex and gelatine. But foam latex is, how shall I put it?, the classic. That's why I'm all the more eager to try it.

I hear that foam latex is not very easy to work with and probably not very forgiving. That's why I'm a bit excited and I'm really happy that I can try it out now. To make it less difficult, I decided to make a forehead for a Klingon-human hybrid. Then at least the modeling is not so difficult.

Over the weekend I sat down and drew a few design ideas. I have B'Elanna Torres in mind for a hybrid. She is clearly Klingon, but not so extreme. Take a look at the short video I made of it.

Oh, and keep your fingers crossed that everything works out. For the upcoming Destination Trek I want to improve my Andorian mask and make it out of foam latex, after last year's silicone version was rather mediocre.

Der Beitrag Neues Projekt: Klingonenstirn aus Schaumlatex erschien zuerst auf Mann vom Mond.

So, yes, I have tried a few materials for modeling. From clay to plasticine to plaster and silicone, there are a variety of options to create the perfect model or sculpture. But ever since I tried modeling with Monster Clay Medium, I've been completely in love with it.

Why Monster Clay is an Ideal Medium for Sculpting.

One of the main reasons I love modeling with Monster Clay is its versatility. Although it is primarily used as a modeling clay, it is also a great option for creating prosthetics and masks. Plus, it can be combined with other materials like silicone or plaster to add extra detail or create unique effects. By the way, I'm also making my current project, the Klingon Forehead, with Monster Clay. Have a look!

Advantages of Monster Clay Medium

First of all, there is its malleability. The clay is easy to knead and shape once it's warm, allowing me to fully explore my creativity. It is also very easy to carve and draw, which allows me to add fine details and shape my sculpture to the desired form.

Another great feature of Monster Clay is the ability to change the consistency by heating it. By heating the wax, I can get a softer or harder consistency depending on what I need at the time. This allows me to better match the material to my needs and achieve the perfect consistency for my work.

Last but not least, I love that Monster Clay has a long working time. As long as it's warm, it's malleable. And just body heat is enough to make it moveable again. Unlike some other materials, it also stays malleable for a very long time, so I have plenty of time to finish my sculpture or model, even if I don't feel like crafting for a few days.

Monster Clay Is Sulfur-free

Another advantage of Monster Clay is that it is sulfur-free. This makes it ideal for use around sensitive materials like silicones and latex. After all, platinum silicone hates sulfur, and latex sometimes reacts quite piqued to it as well.

Kurz: Monster Clay ist ein äußerst vielseitiges und formbares Material zum Modellieren, das mir viel Platz für Kreativität und Gestaltung bietet. Ob für die Erstellung von Prosthetik, Masken oder Skulpturen, Monster Clay ist eine großartige Wahl für jeden Künstler und Modellierer.

Share Your Experience

Have you had any experiences with Monster Clay? Do you have a favorite kind? Or do you think other modeling clays are better? Let me know in the comments or drop me a message.

Related Links:

• Official Monster Makers website: https://monstermakers.com/monster-clay
• Monster Makers on Facebook: https://www.facebook.com/MonsterMakersUS
• Monster Clay on Facebook: https://facebook.com/MonsterClayUSA
• Monster Makers auf Facebook: https://www.facebook.com/groups/monsterclaysculptors/

Der Beitrag Monster Clay – Warum ich diesen wachsartigen Allrounder liebe erschien zuerst auf Mann vom Mond.